AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR PRO® Acrylic Texture Coating No. PR710

Avg. Rating:

BEHR PRO® Acrylic Texture Coating is specifically designed to provide a textured finish on properly prepared interior and exterior surfaces. This product helps minimize defects and irregularities found on concrete and masonry surfaces. It also provides a mildew resistant finish on the paint film. Not for use on floors, below-grade surfaces, and areas subject to hydrostatic pressure.

5 Gallon BEHR PRO Acrylic Texture Coating PR710

Technical Data Sheets

Safety Data Sheets

Finish

Flat - Medium Texture Finish

Best For Use In

Ideal for use on new homes, multi-family residences, and commercial buildings.

Coverage

50 – 80 sq ft per gallon depending on application method and substrate porosity.

PRODUCT USAGE

BEHR PRO Acrylic Texture Coating is ideal for use on commercial and multi-family residential buildings. It provides a decorative appearance that helps minimize surface imperfections. It can be applied to properly prepared and primed concrete, stucco, masonry, concrete block, wood, and metal surfaces. Not for use on floors.

SURFACE PREPARATION

The following steps are recommended for product performance: 

  • All surfaces must be clean, free of dust, chalk, oil, grease, mold and mildew stains, loose and peeling paint, rust and all other foreign substances. Glossy surfaces must be 'scuff-sanded' with appropriate sandpaper and primed prior to coating.
  • Allow new stucco or concrete to cure for 30 days before painting.
  • Fill all gaps with a 100% acrylic, siliconized, paintable caulking and allow to completely dry prior to coating.

Read More

APPLICATION

  • Surfaces to be painted must be cleaned, primed with an appropriate primer and ready to accept a finish coat.
  • For best results, apply when air, material, and surface temperatures are between 50°F and 90°F. Do not apply in direct sunlight. Temperatures above 90°F can cause the paint to dry too fast, whereas temperatures below 35°F can inhibit proper film formation. Do not paint if rain, snow, or heavy dew are expected within 24 hours.
  • Texture Spray: Graco President 10:1 Air Spray System, Graco Texspray RTX 5500PX, or similar texture spray equipment capable of spraying up to 3 mm aggregate size.
  • Roller: Use a high quality 3/4" to 1 1/4" nap roller cover (for small areas and touch-up)
  • Brush: Use a high-quality Nylon/Polyester brush (for small areas and touch-up)
  • Coverage: 50-80 sq ft per gallon depending on the surface texture, porosity, and application method. This does not include the loss of material from spraying. Film thickness depends on the porosity and various substrate irregularities.
  • Certain colors may require additional coats for complete hide.
  • This coating is intended to be applied without thinning or diluting under normal environmental and application conditions. If necessary to maintain good workability, add up to one quart of water per 5 gallons of coating.
  • Intermix containers of the same product to ensure color and sheen uniformity.
  • Darker colors, cooler temperatures, or higher humidity may prolong drying time.
  • Not for use on below-grade substrates. Will not withstand hydrostatic pressure.
  • Not for use on horizontal surfaces (floors, roofs, decks, etc.) where water will collect.
  • Not for use on overhead horizontal surfaces (undersides of balconies, soffits, etc.)
  • Allow 4 weeks before washing or cleaning for full cure.
  • Shelf life under normal conditions is two years unopened.

Read More

DRY TIME AT 77° F AND 50% RH

  • Dries to touch in 1 hours @ 77ºF (25ºC) and 50% Relative Humidity.
  • Recoat after 2 hours.
  • Darker colors, cooler temperatures, or higher humidity may prolong drying time.
  • After 2 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

Read More

CLEAN UP & DISPOSAL

  • Clean equipment and paint spatters with warm, soapy water.
  • For disposal of empty containers and unused product, contact your household refuse collection service.
  • To reduce waste, consult with your retailer or an online paint calculator to determine the correct amount of paint to purchase.

Read More

Read More

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.​ To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.​ Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey.​ To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

To consult with a Behr Paint Company Representative, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot