AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR® MASONRY, STUCCO & BRICK PAINT - SATIN NO. 280

Avg. Rating:

A high-quality, satin acrylic latex paint with excellent hiding properties. This interior/exterior, self-priming, mildew-resistant finish provides excellent adhesion & water repellency on properly prepared interior/exterior smooth, rough & textured masonry, stucco & brick surfaces. This water-based formula is designed to accentuate all textured surfaces while achieving a natural look. It is alkali-resistant, easy to apply, lasts 20 years in all climatic conditions and cleans up with soap & water.

Click Here to see available colors.

5 gal pail of Behr Masonry Stucco and Brick Paint, satin

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

Satin Finish

Best For Use In

Properly prepared Interior or Exterior vertical surfaces

Coverage

250-400 Sq. Ft Coverage per Gallon

PRODUCT USAGE
  • Clock icon

    2-3 HR Dry Time 
    4 HR Recoat Time

  • Paint coverage icon.

    250-400 Sq. Ft 
    Coverage per Gallon

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

Properly prepared Interior or Exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal. Not for use on horizontal surfaces subject to foot traffic.

Preparation

  • Allow new stucco and masonry to cure for 30 days before painting.
  • Remove all loose, peeling paint.
  • Powerwash to remove chalk.
  • Remove dirt and grease with a concrete & masonry degreaser & cleaner; remove mildew stains with a mildew stain removing product.
  • Scuff sand or etch metals. Follow all label instructions.
  • Rinse thoroughly and allow a minimum of 24 hours to dry.
  • Cracks and gaps wider than 1/16" (1.5 mm) should be routed open, dusted and patched with a quality patching compound.
  • Use an acrylic caulk around windows, doors and trim.
  • Scuff sand glossy surfaces.
  • If chalk remains on the surface, prime with a product such as BEHR® NO. 436 Exterior Multi-Surface Primer & Sealer.
  • Prime all patched areas as well as adjacent wood and metal surfaces.
  • If previously sealed or coated, check manufacturer's specifications before painting.

Read More

Application

  • DO NOT THIN.
  • Intermix all cans of same product to ensure color uniformity.
  • Stir paint before and occasionally during application.
  • Use product when air and surface temperature are 50-90˚F (10-32˚C).
  • Do not use if rain or heavy dew is expected within 24 hours.
  • Apply using a high quality 3/4"-1" nap roller (rough surfaces) or 3/8"-1/2" nap roller (smooth surfaces), nylon/polyester brush or airless sprayer (.015"-.021" spray tip, 60 mesh filter).
  • Apply a second coat, if necessary. Maintain a wet edge to avoid lap marks.

Read More

Dry Time

  • Longer dry time required in cooler temperatures and higher humidity.
  • After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

Read More

Disposal

  • Properly dispose of all soiled rags.
  • For disposal of empty containers and unused product contact your household refuse collection service.

Read More

Read More

WARRANTY

LIMITED WARRANTY

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 20 years from the date that the product is received by the original consumer purchaser or their authorized representative (installation contractor, etc.) THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED, VERTICAL SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS.  This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability, or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133.  Behr Process LLC reserves the right to inspect any and all applications of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot