AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR PREMIUM® DIRECT-TO-METAL EGGSHELL PAINT NO. 7200

Avg. Rating:

BEHR PREMIUM Interior/Exterior Direct-To-Metal Eggshell Paint is engineered for excellent corrosion resistance and adhesion to a variety of properly prepared or primed residential and light commercial metal surfaces. It provides a durable Semi-Gloss finish that withstands tough elements on both interior and exterior surfaces.

5 gallon of BEHR PREMIUM Direct to Metal Eggshell 7200

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

Eggshell Finish.

Best for use in

Use on properly prepared and cleaned coated and uncoated interior and exterior ferrous and non-ferrous metal surfaces.

Coverage

350-400 sq. ft. per gallon depending on the application method and substrate porosity. It does not include the loss of material from spraying.

PRODUCT USAGE
  • Two paint brushes icons.

    2 Coats Recommended

  • Rough
    350-400 Sq. Ft
    Smooth
    500-550 Sq. Ft.

  • Clock icon

    1 HR Dry Time
    3 HR Recoat Time
     

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

Use on properly prepared and cleaned coated and uncoated interior and exterior ferrous and non-ferrous metal surfaces. Provides protection for all Metals: Doors, Windows, Trim, Shutters, Fences, Garage Doors, Outdoor Furniture, Railing and Wrought Iron.

Preparation

Proper surface preparation is required

  • All surfaces must be clean, dry, free of rust, dust, dirt, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint and all other foreign substances.
  • Mildew: Remove mildew stains with a mildew stain removing product.
  • UNPAINTED METAL SURFACES: Ferrous Metals: Use SSPC-SP2. Remove all rust and mill scale using sandpaper, steel wool, abrasive blasting, or other abrading methods to create a profile on the metal’s surface.
  • Remove any residue, and clean the metal by scrubbing the surface with a solvent such as mineral spirits or acetone. Bare metal must be coated the same day it is cleaned
  • Galvanized Metal, Aluminum & Other Non Ferrous Metals: Use SSPC-SP1. All oil film on new metal must be removed before it is painted.
  • Remove oil film with a solvent such as mineral spirits or acetone and remove any residue.
  • Sand the surface with sandpaper, steel wool, or by using a chemical etcher.
  • Clean by scrubbing the surface with a solvent such as mineral spirits or acetone and remove any residue.
  • PREVIOUSLY PAINTED METAL SURFACES: Remove all loose and peeling paint and all other foreign substances.
  • Clean any dirt and grease by scrubbing the surface with a solvent such as mineral spirits or acetone and remove any residue.
  • Sufficiently sand and dull all smooth, hard, dense or glossy surfaces before coating for maximum performance.
  • It is recommended to test a small inconspicuous area for adhesion one week prior to application. If test area shows insufficient adhesion, additional abrasion or complete removal of the previous coating may be required.
  • All exterior alkyd surfaces should be primed prior to painting.

Read More

Prime

  • UNPAINTED METAL SURFACES: Ferrous Metals: Self priming on properly prepared substrates.
  • For best results, use a MPI #107 certified rust-inhibitive, water based primer, such as or BEHR PREMIUM PLUS® Multi-Surface Primer & Sealer No. 436.
  • To properly prepare the uncoated surface, please refer to the surface preparation instructions.
  • Galvanized Metal, Aluminum & Other Non Ferrous Metals: Use a MPI #134 certified water based primer for galvanized surfaces, such as BEHR PREMIUM PLUS Exterior Multi-Surface Primer & Sealer No. 436.
  • To properly prepare the uncoated surface, please refer to the surface preparation instructions.
  • PREVIOUSLY PAINTED METAL & GLOSSY SURFACES: Self priming on properly prepared substrates.
  • Use a MPI #134 certified water based primer for galvanized surfaces, such as BEHR PREMIUM PLUS Exterior Multi-Surface Primer & Sealer No. 436.
  • To properly prepare the uncoated surface, please refer to the surface preparation instructions.

Read More

Application

  • DO NOT THIN PRODUCT. Stir before and during application.
  • Intermix multiple containers to ensure color uniformity.
  • Use adequate ventilation during application and drying process.
  • Certain colors may require 2 or more coats to achieve complete hide and coverage.
  • Use product when air and surface temperature are 50-90˚ F (10-32˚ C), or for exterior when precipitation is expected within 24 hours after project completion.
  • Apply a thin coat using a high quality synthetic brush, 1/4"-3/8" nap roller or an airless sprayer (.013"-.017" spray tip).
  • NOTE: If touch-up is necessary, same application method is recommended.

Read More

Dry Time

  • Longer dry time required in cooler temperatures and higher humidity.
  • Wait at least 4 weeks before rinsing or cleaning the surface with a mild, non-abrasive detergent.

Read More

Clean Up

  • Properly dispose of all soiled rags and protect unused product from freezing.
  • For disposal of unused paint products, please contact your household refuse collection service.

Read More

Read More

WARRANTY

LIMITED WARRANTY

For one year from the date that the product is received by the original consumer purchaser or their authorized representative (installation contractor, etc.), Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date that the product is received by the original consumer purchaser or their authorized representative (installation contractor, etc.), Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warrant, negligence, strict liability, or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot