Primer & Sealer for Kitchen, Bath & Trim | Interior Stain-Blocking | Behr

BEHR® Kitchen, Bath & Trim Stain-Blocking Primer & Sealer

Avg. Rating:

For excellent performance under any paint sheen, choose BEHR® Kitchen, Bath & Trim Stain-Blocking Primer & Sealer. This self-leveling acrylic blend helps create a uniform topcoat sheen, so it's ideal for multiple surfaces, including metal, vinyl, concrete and glossy surfaces. It blocks medium to heavy stains, and it's tintable to allow for dramatic color changes. This is also a low odor formula.

1 gal can of Behr Kitchen, Bath & Trim Primer

Finish

The self-leveling acrylic blend helps create a uniform topcoat sheen.

Best For Use In

Ideal for Drywall, Galvanized Metal, Vinyl, Aluminum, Wood, Concrete, and on glossy surfaces or oil-based paint.

Coverage

250-400 Sq. Ft. per Gallon

PRODUCT USAGE
  • Clock icon

    30 Min Dries to Touch
    1 HR Ready to Topcoat

  • Paint coverage icon.

    250-400 Sq. Ft 
    Coverage per Gallon

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

  • Over properly prepared uncoated and previous painted Interior surfaces.
  • Ideal for Drywall, Galvanized Metal, Vinyl, Aluminum, Wood, Concrete, and on glossy surfaces or oil-based paint.
  • Works under all sheens; recommended under SATIN, SEMI-GLOSS and HI-GLOSS paint.
  • Bright or deep colors require a tinted primer.
  • Have primer tinted close to topcoat color with no more than 4 ounces of colorant per gallon. 

Preparation

  • All surfaces should be properly prepared and cleaned.
  • Remove loose paint, wash off chalk, dirt, and grease with detergent, rinse and allow to dry.
  • Remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces and repair imperfections.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming. 

Read More

Application

  • Apply when air and surface temperatures are between 50-90°F (10-32°C).
  • Use a high-quality 3/8-1/2" nap roller cover, nylon polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter).
  • Stir occasionally.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Spot prime patched areas first, follow with a complete primer coat.
  • Heavy stains may require two coats.
  • On stained surfaces, topcoat in 4 hours; for heavy stains, topcoat in 16 hours.

Read More

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Read More

Read More

Reviews

WARRANTY

LIFETIME LIMITED WARRANTY: Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What sheen do I need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot