AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc
6LcpywkUAAAAAJ1-KJYsxb57uYQhMX6hpD1zayJA

BEHR® Microlon® Roller Covers

Avg. Rating:

BEHR Microlon rollers combine the high carrying capacity of a traditional microfiber roller and the ultra-smooth finish of a traditional woven roller. Specifically engineered to use with all paints and stains on smooth to semi-smooth surfaces. Rollers are constructed with a double-thick polypropylene core that resists water, solvents, and cracking.

SPECIFICATIONS

  • Roller Length: 9"
  • Nap Size: 7/16"
  • Fabric Type: Microfiber
  • Surface Type: Smooth & Semi-Smooth
  • Ideal Projects: Walls, Ceilings & Floors
  • Paint Type: All Paints & Stains

Click Here to find out if BEHR Microlon rollers are available in a Home Depot® nearest you.

3 pack of microlon rollers

FINISH

Resists shedding for an ultra-smooth finish.

BEST FOR USE IN

7/16-inch nap is ideal for walls, ceilings, and floors with smooth to semi-smooth surfaces.

Coverage

Holds more paint for excellent coverage.

Product image of BEHR<sup>&reg;</sup> MICROLON<sup>&reg;</sup> ROLLER COVERS
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The Home Depot logoSold Exclusively at The Home Depot
PRODUCT USAGE
Use with all paints and stains on smooth to semi-smooth surfaces.

To Use

  • Pre-wet roller cover before use. This will help prime the roller for paint and remove any loose fibers from the roller cover. To pre-wet, dip the roller cover into a water-filled bucket or lightly run it under the sink. Attach it to your paint frame and spin out the water until the roller cover is slightly damp. Always pre-wet roller covers with the same type of liquid you use on your project. Pre-wet with water for water-based coatings and pre-wet with mineral spirits for oil-based coatings.
  • To load, firmly roll the roller into the well of the paint-filled tray and back to the roll-off area. Repeat this back and forth motion until the roller is sufficiently coated and just short of dripping.
  • To paint, begin in the corner, by making a “V” figure 1 ½ feet by 2 feet. Go back and fill in “V”, then continue working from dry into wet areas. While painting, maintain a wet edge and apply minimal pressure to the roller to ensure the roller does not dry out.
  • Once a section is complete, lightly back roll to lay off the paint and create a consistent finish across your project.

To Clean

Remove cover from frame immediately after use.

  • WATER-BASED COATINGS: Wash in warm soapy water, rinse, dry.
  • OIL-BASED COATINGS: Rinse in a recommended solvent. Wash in warm soapy water, rinse, dry. DO NOT SOAK IN WATER OR SOLVENT.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com