AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

ETX® SingleShot Wall Texture 3013

Avg. Rating:

SingleShot™ is an All-in-One aerosol texture spray ideal for drywall patches that require texture. The 12oz aerosol spray can system features an adjustable nozzle to provide an assortment of texture patterns from a fine Orange Peel to a heavy Knockdown, allowing for ultimate control over the amount of texture applied. 

Available in 2 sizes:
 - SingleShot™ Wall Texture 12 oz
 - SingleShot™ Wall & Ceiling Texture 20 oz

12 oz can of SingleShot texture spray

FINISH

An assortment of texture patterns from a fine Orange Peel to a heavy Knockdown

BEST FOR USE IN

Ideal for use on properly prepared surfaces such as: Drywall

COVERAGE

Average 12 oz can covers up to 60 sq ft
Average 20 oz can covers up to 80 sq ft
Coverage varies depending on the amount of texture applied.

Technical Data Sheets

PRODUCT USAGE
  • Clock icon

    Allow to Completely Dry:
    Before Applying Paint

  • Paint coverage icon.

    Coverage:

    12oz: Up to 60 sq. ft.
    20oz: Up to 80 sq.ft.

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

Ideal for use on properly prepared surfaces such as: Drywall

Preparation

  • The surface must be clean and dry before spraying SingleShot™.

Read More

Application

  • Always keep nozzle pointed away from face. The use of personal protective equipment is required.
  • Shake can vigorously for 10–15 seconds. This product works best when contents are between 75°F and 90°F.
  • The adjustable nozzle allows for infinite adjustability.
  • Holding the can upright approximately 16-22 inches from the wall/ceiling, depress the nozzle to begin spraying. Test SingleShot in an inconspicuous spot to achieve the desired pattern. If the flow decreases, shake the can vigorously. Spray using a circular motion to disperse evenly. Overlap the spray onto the existing texture to help blend in. A second coat may be applied for a heavier texture.

Read More

Dry Time

  • Drying times will differ, depending on the surface, heaviness of texture, humidity, etc. Paint when completely dry with your choice of paint. For better results, prime area before painting.

Read More

Clean-Up & Disposal

  • Clear spray valve immediately after use by turning can upside down and spraying until only clear gas is released. If spray nozzle becomes clogged, remove and clean with water.
  • Do not stick pins or wire into spray nozzle opening.
  • Do not burn or place in home trash compactor.
  • Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.

Read More

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot