AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR Premium® Penetrating Oil-Based Wood Stain No. B3400

Avg. Rating:

BEHR PREMIUM Penetrating Oil-Based Wood Stain provides warm rich color to any of your interior wood stain projects. This oil-based formula provides deep penetration into the wood grain, enhancing the beauty of your wood with one coat coverage. This unique penetrating oil-based formula can be tinted to a wide range of custom colors and is offered in many popular pre-mix colors.

1 quart can of Behr Premium Penetrating Oil Based Wood Stain, interior

Technical Data Sheets

Safety Data Sheets

Finish

Flat finish prior to adding protective clear coat.

Best For Use In

Properly prepared interior wood surfaces, both previously finished and unfinished, painted surfaces, fiberglass, coated metal and composition surfaces.

Coverage

150 sq. ft. per quart depending on the application method and substrate porosity. It does not include the loss of material from spraying.

PRODUCT USAGE
  • Icon of hand sanding surface with sanding block

    Prep
    Before Use

  • Icon of paint brush applying paint

    1 Coat Application
    Addtl. Coats if Desired

  • Icon representing length and width dimensions to determine square footage

    Spread Rate: 
    150 Sq. ft./Qt.

  • Icon of cleaning paint brush with mineral spirits

    Clean-Up
    Mineral Spirits or
    Paint Thinner

READY TO USE. PROTECT FROM FREEZING.

Properly prepared interior bare wood surfaces including furniture, cabinets, doors, trim, molding, paneling and floors. Excellent for both vertical and horizontal surfaces.

Surface Preparation

To ensure uniform stain color and beautiful results on bare wood, apply BEHR Premium Oil-Based Pre-Stain Wood Conditioner prior to staining. Follow label instructions.

  • Surfaces (raw and previously finished) must be dry, clean, and free of dirt, grease, and glue.
  • For Raw Wood: Sand with #120-grit sandpaper followed by #180-grit or finer for a smoother finish if desired. Remove all dust.
  • Over Previously Finished Surfaces: Lightly sand surface with 400 grit sandpaper. Remove all dust.
  • To ensure uniform stain color and beautiful results on bare wood, apply BEHR Premium Oil-Based Pre-Stain Wood Conditioner prior to staining. Follow label instructions.

Read More

Product Preparation and Color Testing

  • Stir stain thoroughly before and occasionally during use. Do not thin. 
  • Always test stain on an inconspicuous area of the wood to verify desired color.
  • The color will vary depending on the type of wood.
  • Work in a well-ventilated area.

Read More

Stain Application on Bare Wood

  • After the wood surface has been cleaned, sanded smooth and all dust removed, apply stain liberally in direction of the grain with a brush, foam applicator or lint-free cloth. 
  • Allow the stain to penetrate 5-10 minutes.
  • Wipe with a soft cloth, first across the grain, then with the grain until all excess is wiped off. 
  • Do not allow the stain that has not absorbed to dry on the surface.

Read More

Clear Finish Application

  • Allow the stain to dry for a minimum of 12 hours.
  • Complete your project by applying a BEHR PREMIUM® clear protective finish, following label directions.

Read More

Application Techniques

.

  • For application techniques on multiple substrates and decorative looks, go to our how-to videos at www.behr.com.

Read More

Dry Time

  • Allow at least 12 hours to dry before re-coating or top coating with a BEHR clear protective finish.

Read More

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service

Read More

Read More

WARRANTY

For one year from the date of purchase, Behr Process LLC warrants to the original consumer purchaser, (1) that the product meets Behr Process LLC’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. In the event this product proves to be defective within one year from the date of purchase, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot