AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc
6LcpywkUAAAAAJ1-KJYsxb57uYQhMX6hpD1zayJA

BEHR ULTRA® Stain-Blocking Ceiling Paint No. 5558

Avg. Rating:

BEHR ULTRA® Stain-Blocking Ceiling Paint is a versatile stain-blocking paint & primer with excellent durability and hide in fewer coats. It is spatter and drip resistant with a matte non-reflective appearance that helps hide minor surface imperfections. Ultra Ceiling Paint is low VOC, can be tinted to light colors, and provides an antimicrobial-mildew resistant paint finish.

AVAILABLE IN OVER 2,500 COLORS
Find the perfect color for all your clients project. Explore Colors

1 gal can of Behr Ultra stain-blocking ceiling paint

Technical Data Sheets

Safety Data Sheets

Product Certifications & Declarations

Finish

Flat finish

Best For Use In

Use on properly prepared interior ceilings

Coverage

250-400 sq. ft. per gallon depending on the application method and substrate porosity. It does not include the loss of material from spraying.

PRODUCT USAGE
  • Clock icon

    1 HR Dry Time
    2 HR Recoat Time

  • Paint coverage icon.

    250-400 Sq. Ft 
    Coverage per Gallon

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

  • Thermometer Icon

    Protect
    from Freezing

Properly prepared coated and uncoated Interior Ceilings.

Preparation & Prime

  • Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces.
  • Countersink nailheads, repair imperfections and sand smooth.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming.
  • Make sure that there are no active water problems and that any previous water damage is fully dry.
  • Use BEHR ULTRA™ STAIN-BLOCKING CEILING PAINT as a primer for repaired or uncoated surfaces.
  • Lock in stains with BEHR ULTRA STAIN-BLOCKING CEILING PAINT as a spot primer. For heavy stains, test for stain bleedthrough by applying BEHR ULTRA STAIN-BLOCKING CEILING PAINT as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before topcoating the entire ceiling. If bleeding continues, a longer dry time is needed before topcoating. Additional coats may be needed to achieve hide.
  • For drastic color changes, apply a primer coat of BEHR ULTRA STAIN-BLOCKING CEILING PAINT if needed.

Read More

Application

  • Use product when the surface and air temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019” spray tip, 60 mesh filter).
  • Popcorn style acoustic ceilings; use acoustic ceiling roller cover (1/2-3/4” nap) or airless sprayer (.015-.019” spray tip, 60 mesh filter).
  • Coverage is 250-400 sq. ft. (23-37 m2) per gallon depending on the surface texture, porosity and application method.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Multiple coats may be required to complete hide.

Read More

Dry Time

  • Dries to touch in 1 hour at 77°F (25°C) and 50% humidity, re-coat in 2 hours.
  • Longer dry time required in cooler temperatures and in higher humidity.

Read More

Clean Up & Storage

  • Use soap and water.
  • Properly dispose of all soiled rags and protect unused product from freezing.
  • For disposal of empty containers and unused product, contact your local household refuse collection service.

Read More

Read More

WARRANTY

LIFETIME LIMITED WARRANTY

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot