BEHR PREMIUM^® Concrete Crack Filler No. 972

LIMITATIONS:

• Results will vary depending on substrate color and crack size.
• Not for use to repair structural damage or for use on vertical surfaces.
• Horizontal concrete or masonry surfaces may shift due to factors such as temperature changes, heavy loads, ground settlement, and water/moisture. Periodic touch-ups may be needed to address these movements.
• For surface movement on top coated surfaces, sanding or stripping may be required before touching up with Behr Premium Crack Filler for a uniform finish. Reapply topcoat once crack filler has cured.
• Using a transparent topcoat over BEHR PREMIUM Concrete Crack Filler may cause visible darkening compared to the surface.
• Shelf life under normal conditions is two years unopened.

PREPARATION (Proper surface preparation is required):

• All cracks must be clean, sound, dry, and free of any dirt or debris. Rinse cracks with a garden hose or a power washer and allow to fully dry.
• If planning to topcoat, follow surface preparation outlined on the manufacturer’s label instructions.
• For best topcoat results, use NO. 880 BEHR PREMIUM® Concrete Bonding Primer after BEHR PREMIUM Crack Filler has fully cured.

APPLICATION:

• Shake bottle well, remove red cap, and cut a small opening on the spout.
• Pour into crack fully filling all voids. Do not overfill as it may be hard to remove any residual filler that cures around the surface.
• For deep cracks, an alternative filler may be used as a base layer, then top off with BEHR PREMIUM Concrete Crack Filler.
• Carefully level off and remove any excess material leaving a flush surface. Example tools to use are small brushes, putty knifes, etc. If surface is clean, then the excess dry material can be saved and reused.
• Use a spray bottle to lightly mist with clean water and fully saturate. Avoid puddling.
• Large and deep cracks may be prone to slight shifting upon misting. A second fill and mist may be necessary to get a flush uniform finish.

DRY TIME:

• Allow the BEHR PREMIUM Concrete Crack Filler to fully dry before applying an optional topcoat or subjecting to any traffic.
• Allow 1-hour dry time for hairline cracks up to 1/8" wide.
• Longer dry time may be required in cooler temperatures and higher humidity, and for larger cracks

STORAGE:

• Attach red cap back to bottle for storage.
• Store in a dry, well-ventilated area away from sources of heat, moisture, combustible materials, and incompatible substances. Keep container tightly closed when not in use.
• Shake well before reuse.