AIzaSyBMJLehm8j6j0La8w7yFA5HiR9WVNS8rHc

BEHR DECKplus® Transparent Waterproofing Wood Finish No. 400

Avg. Rating:

Give wood the protection it needs while still showcasing its full natural beauty with BEHR's Transparent Waterproofing Wood Finish. This 100% acrylic formula seals out water and blocks the sun's harmful UV rays for up to two years on decks and up to four years on fences and siding. It's available in 3 pre-mixed colors, so you can get the look you want while preserving your valuable investment.

See Our Selection of Transparent Wood Finishes.

5 gal pail of Behr DeckPlus Transparent Waterproofing Wood Finish

Technical Data Sheets

Safety Data Sheets

Finish

Creates a Transparent Finish that showcases the full natural beauty of the wood.

Best For Use In

For properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences and Wood Patio Furniture.

Coverage

1st Coat 300-350 Sq.Ft.; 2nd Coat 600-700 Sq.Ft.

PRODUCT USAGE
  • Paint prep icon

    Must Prep
    Before Applying
    Wood Finish

  • Two paint rollers, two coat icon.

    2 Thin Coats 
    Required

  • Spread rate icon

    1st Coat
    300-350 Sq. Ft
    2nd Coat
    600-700 Sq. Ft.

  • Soap and water cleaning a paint brush icon

    Soap & Water
    Clean-Up

Recommended for properly prepared new to slightly weathered, unsealed exterior wood surfaces (0-5 years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences and Wood Patio Furniture.

Preparation

  • Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
  • BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
  • When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus.
  • On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Rinse thoroughly and allow to dry before coating. Lightly sand to remove remaining wood fibers/fuzz.

Read More

Application

  • Must apply between 40-90˚F (4.5-32˚C). Do not use if rain is expected within 24 hours. The wood surface must be completely dry before application.
  • Intermix multiple containers to ensure color uniformity. DO NOT THIN PRODUCT.
  • Stir product occasionally throughout application. Test product for penetration and color on a small hidden area before proceeding.
  • Use a nylon/polyester brush for areas requiring more accuracy. Use of rollers should be limited to rough surfaces only.
  • Use 3/8” nap or longer when appropriate. A high quality pump sprayer with a variable tip or an airless sprayer with a .015 - .019" tip may be used.
  • Work in small sections lightly saturating the surface and immediately back-brush or use pad applicator to eliminate puddling, remove excess and evenly distribute the finish.
  • Maintain a wet edge when applying. Apply product end-to-end or to board lengths to prevent lap marks.
  • Over application of finish will lead to surface failure including peeling and cracking. Avoid applying finish too heavily. For optimum performance, coat all six sides of wood.

Read More

Dry Time

  • 1-2 hours before recoat. Allow 72 hours for full cure.

Read More

Disposal

  • For disposal of empty containers and unused product, contact your household refuse collection service.

Read More

Read More

WARRANTY

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 4 years on vertical surfaces and 2 years on horizontal surfaces, from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS.  Color fading and slight natural graying of the wood may occur during the warranty period, especially in areas exposed to heavy foot traffic or excessive weather. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty.  Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.

Read More

Reviews

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
What Product Do I Need?
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep uncoated and previously coated concrete surfaces. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when a topcoat clear finish is desired.
$0.00
The Home Depot logoSold Exclusively at The Home Depot