BEHR MARQUEE^® Exterior Semi-Gloss Enamel

Avg. Rating:

Add dazzling impact and style to your home's exterior accents with BEHR MARQUEE Exterior Semi-Gloss Enamel paint. This radiant, durable sheen provides a perfectly polished look, vivid color to trim, windows and doors, including garage doors, as well as shutters and outdoor furniture. It's also great for surfaces like railings and wrought iron.

Now comes with the new SIMPLE POUR Lid. Read about how this innovative lid helps you and get our best tips for using it.

FOR TINT BASE – DO NOT USE WITHOUT THE ADDITION OF TINTING COLORANT.

^◊A primer coat may be needed on some surfaces. See label for details.

1 gal can of Behr Marquee Exterior Paint, semi-gloss

Finish

A Semi-Gloss paint sheen is a sleek, radiant sheen that creates a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.

Best For Use In

Doors, trim and shutters; Exterior furniture. Do not use on floors.

Coverage

250-400 Sq. Ft. per Gallon

PRODUCT USAGE

1 HR Dry Time
2 HR Recoat Time
250-400 Sq. Ft
Coverage per Gallon
Soap & Water
Clean-Up
Protect
from Freezing

Where to Use Use on properly prepared and cleaned coated and uncoated Exterior surfaces. Protection for Wood, Vinyl, Aluminum, Fiber Cement Siding, Metals, Brick, Masonry, Stucco, Steel and Fences. Do not use on floors.

Preparation & Prime

Use on properly prepared and cleaned coated and uncoated Exterior surfaces. Countersink nailheads, fill and sand smooth. Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.
Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.
Scuff sand or etch metals. Rinse and allow to dry.
Caulk windows, doors and other openings.
Allow new stucco, plaster and masonry to cure for 30 days before painting.
Use BEHR MARQUEE paint as a primer for repaired or uncoated surfaces, including woods that contain tannins and heavily stained areas (two primer coats required for redwood and cedar). Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR MARQUEE.
For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR MARQUEE, if needed.

Application

Apply product on dry substrates when air and surface temperatures are between 35°-90°F (2°-32°C) and will remain between 35°-90°F (2°-32°C) for at least 4 hours after applying.
Allow paint film to dry for at least 60 minutes prior to rain showers when temperatures are between 60°-70° F (15°-21° C) and 60-70% relative humidity. Lower temperatures, higher humidity or deep colors may increase dry time and/or rain resistance time.
Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
On semi-smooth surfaces, use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 -.021" spray tip, 60 mesh filter).
On rough surfaces, use a high quality 3/4-1" nap roller cover.
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats.
After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant.
When applying to vinyl, color choice must be the same color or lighter than the existing color.
Do not use on floors.

Disposal

For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Compare Behr Sheens

Stucco / Masonry / Brick
Siding ( Aluminum / Fiber Cement / Wood / Vinyl )
Doors / Windows / Shutters
Garage Doors / Gutters
Soffit / Fascia / Eaves

BEHR MARQUEE^® Exterior Flat Learn More

BEHR MARQUEE^® Exterior Satin Enamel Learn More

BEHR MARQUEE^® Exterior Semi-Gloss Enamel Learn More

SDS AND DATA SHEET

BEHR MARQUEE^® Exterior Semi-Gloss Enamel

Ultra Pure White No. 5450 Medium Base No. 5454 Deep Base No. 5453

See Full SDS, Product Data & Safety

WARRANTY

LIFETIME LIMITED WARRANTY: Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.