How to Stain a Chair with BEHR^® Fast Drying Water-Based Wood Stain

So you’re ready to give that chair some new life. Let’s do it. We can make this chair brighten up the room using these quick-drying, water-based products.

For Best Results:

Start your interior stain project by cleaning the surface and lightly sanding the wood.

Apply BEHR^® Water-Based Pre-Stain Wood Conditioner to prevent streaks and blotches.

Suggested Tools & Supplies

Sandpaper (120, 220, 320 and 400 Grit)
Sanding Block
Cheesecloth
Latex Gloves
Mini Foam Applicator
Multi-Purpose Shop Rags
Metal Can Opener
Paint Thinner
Painter's Tape
Plastic Containers
Drop Cloths
Tack Cloth
Natural Bristle Brush
Safety Glasses
Screwdriver

Step 1
To prep the surface, sand the wood evenly with a sanding block and 220 grit sandpaper. Then, wipe away the dust with a lint-free cloth.
Step 2
Apply BEHR^® Water-Based Pre-Stain Wood Conditioner and let it penetrate the wood for 20 minutes.
Step 3
Apply BEHR^® Fast Drying Water-Based Wood Stain, working the stain into the grain. Give the stain 3-5 minutes to penetrate.
Step 4
Use a lint-free cloth to remove any excess stain, and to blend any light and dark areas. Let the stain dry for one hour. For darker color, repeat the previous steps.
Step 5
Brush on two coats of BEHR^® Fast Drying Water-Based Polyurethane. Lightly sand between coats with 220 grit sandpaper.

TIP: For a smooth finish, hold the brush at a 45-degree angle and brush lightly across the surface.