BEHR^® DECKplus^® Semi-Transparent Waterproofing Wood Stain

Avg. Rating:

Accent and enhance your wood's natural patterns while providing increased protection from the elements with BEHR's Semi-Transparent Waterproofing Wood Stain. This 100% acrylic formula seals out water and blocks the sun's harmful UV rays for up to three years on decks and up to five years on fences and siding, and is available in 60 custom colors to help you create a look that's as beautiful as it is durable.

See Our Selection of Semi-Transparent Colors.

ALWAYS ADD TINTING COLORANTS BEFORE USING. FOR BEST RESULTS, APPLY SECOND COAT THINNER THAN THE FIRST COAT.

1 gal can of Behr DeckPlus Semi Transparent Waterproofing Wood Stain

Finish

Creates a Semi-Transparent film that enhances the wood's natural patterns.

Best For Use In

Properly Prepared new to moderately weathered, unsealed exterior wood surfaces (0-10 years exposure).

Coverage

1st Coat 250-300 Sq.Ft.
2nd Coat 500-600 Sq. Ft.

PRODUCT USAGE

Must Prep
Before Staining
2 Thin Coats
Required
1st Coat
250-300 Sq. Ft
2nd Coat
500-600 Sq. Ft.
Soap & Water
Clean-Up

Where to Use Recommended for properly prepared new to moderately weathered, unsealed exterior wood surfaces (0-10 years exposure) such as: Decks, Railings, Shakes, Shingles, Siding, Roofs, Fences and Wood Patio Furniture.

Preparation

Use a product such as BEHR PREMIUM® NO. 64 Wood Stain & Finish Stripper to remove loose wood fibers, latex, oil-based and 100% acrylic coatings on new or weathered wood.
BEHR PREMIUM® NO. 63 All-In-One Wood Cleaner MUST be used following NO. 64 to clean, brighten & neutralize wood.
When NO. 64 is not needed, use a product such as NO. 63 to clean and brighten the wood surface and to remove light to medium exterior stains caused by mold, mildew, algae & fungus. Rinse thoroughly and allow to dry before coating.
On new wood, use a product such as NO. 63 to remove mill glaze and open the pores of the wood. Lightly sand to remove remaining wood fibers/fuzz.

Application

Must apply between 40-90˚F (4.5-32˚C). Do not use if rain is expected within 24 hours. The wood surface must be completely dry before application.
Intermix multiple containers to ensure color uniformity. DO NOT THIN PRODUCT. Stir product occasionally throughout application. Test product for penetration and color on a small hidden area before proceeding.
Use a nylon/polyester brush for areas requiring more accuracy. Use of rollers should be limited to rough surfaces only.
Use 3/8” nap or longer when appropriate. A high quality pump sprayer with a variable tip or an airless sprayer with a .015 - .019" tip may be used.
Work in small sections lightly saturating the surface and immediately back-brush or use pad applicator to eliminate puddling, remove excess and evenly distribute the stain. Maintain a wet edge when applying. Apply product end-to-end or to board lengths to prevent lap marks.
Over application of stain will lead to surface failure including peeling and cracking. Avoid applying stain too heavily. For optimum performance, coat all six sides of wood.

Dry Time

1-2 hours before recoat. Allow 72 hours for full cure.

Disposal

For disposal of empty containers and unused product, contact your household refuse collection service.

4 Common Myths About Wood Cleaners

I don’t need to use a wood cleaner

Not only does a wood cleaner remove dirt and mildew stains prior to coating, but it actually opens the pores of the wood for the coating to properly adhere to the surface.

I can complete my project without it

Properly cleaning the wood actually saves time in the long run by improving the longevity and durability of the stain.

It requires extra tools I don’t have

All you need is a water source and a stiff bristle brush to effectively clean a wood surface with wood cleaner. Follow all instructions.

Using a wood cleaner is complicated

If you’ve ever washed a car, then you can clean a wood surface with a wood cleaner!

Reviews

Often Bought Together

BEHR PREMIUM^® All-In-One Wood Cleaner

Learn More

BEHR PREMIUM^® Wood Stain & Finish Stripper

Learn More

SDS AND DATA SHEET

BEHR^® DECKplus^® Semi-Transparent Waterproofing Wood Stain

Tint Base No. 3077

See Full SDS, Product Data & Safety

WARRANTY

Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 5 years on vertical surfaces and 3 years on horizontal surfaces, from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. Color fading and slight natural graying of the wood may occur during the warranty period, especially in areas exposed to heavy foot traffic or excessive weather. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Process LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.