BEHR^® Masonry, Stucco & Brick Paint - Flat

Avg. Rating:

A high-quality, flat acrylic latex paint with excellent hiding properties. This int/ext, self-priming, mildew resistant finish also provides excellent adhesion & water repellency on properly prepared int/ext smooth, rough & textured masonry, stucco & brick surfaces. This water-based formula is designed to accentuate all textured surfaces while achieving a natural look. It is alkali-resistant, easy to apply, lasts 20 yrs. in all climatic conditions and cleans up with soap & water.

READY TO USE OR ADD TINTING COLORANTS

Click Here to see available colors.

1 gal can of Behr Masonry Stucco and Brick Paint, flat

Finish

Flat Finish

Best For Use In

Properly prepared Interior or Exterior vertical surfaces as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal.

Coverage

250-400 Sq. Ft Coverage per Gallon

PRODUCT USAGE

2-3 HR Dry Time
4 HR Recoat Time
250-400 Sq. Ft
Coverage per Gallon
Soap & Water
Clean-Up
Protect
from Freezing

Where to Use

Properly prepared Interior or Exterior vertical surfaces such as: Stucco, Masonry, Concrete, Concrete Block and Brick as well as adjacent Wood and Metal. Not for use on horizontal surfaces subject to foot traffic.

Preparation

Allow new stucco and masonry to cure for 30 days before painting.
Remove all loose, peeling paint.
Powerwash to remove chalk.
Remove dirt and grease with a concrete & masonry degreaser & cleaner; remove mildew stains with a mildew stain removing product.
Scuff sand or etch metals. Follow all label instructions.
Rinse thoroughly and allow a minimum of 24 hours to dry.
Cracks and gaps wider than 1/16" (1.5 mm) should be routed open, dusted and patched with a quality patching compound.
Use an acrylic caulk around windows, doors and trim.
Scuff sand glossy surfaces.
If chalk remains on the surface, prime with a product such as BEHR® MULTI-SURFACE STAIN-BLOCKING PRIMER & SEALER.
Prime all patched areas as well as adjacent wood and metal surfaces.

Application

DO NOT THIN.
Intermix all cans of same product to ensure color uniformity.
Stir paint before and occasionally during application.
Use product when air and surface temperature are 50-90˚F (10-32˚C).
Do not use if rain or heavy dew is expected within 24 hours.
Apply using a high quality 3/4"-1" nap roller (rough surfaces) or 3/8"-1/2" nap roller (smooth surfaces), nylon/polyester brush or airless sprayer (.015"-.021" spray tip, 60 mesh filter).
Apply a second coat, if necessary. Maintain a wet edge to avoid lap marks.

Dry Time

Longer dry time required in cooler temperatures and higher humidity.
After two weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

Disposal

Properly dispose of all soiled rags.
For disposal of empty containers and unused product contact your household refuse collection service.

SDS AND DATA SHEET

BEHR^® Masonry, Stucco & Brick Paint - Flat

White No. 270 Deep Base No. 272

See Full SDS, Product Data & Safety

WARRANTY

LIMITED WARRANTY: Behr Paint Company warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for 20 years from the date of purchase. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED, VERTICAL SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.