ETX^® SingleShot^™ Wall Texture

Avg. Rating:

ETX® SingleShot™ Wall Texture is an All-in-One aerosol texture spray ideal for drywall patches that require texture. The 12 oz aerosol spray can system features an adjustable nozzle to provide an assortment of texture patterns from a fine Orange Peel to a heavy Knockdown, allowing for ultimate control over the amount of texture applied. This waterbased, low odor formula provides professional-grade results with effortless clean-up for all your projects.

FINISH

An assortment of texture patterns from a fine Orange Peel to a heavy Knockdown

BEST FOR USE IN

Ideal for use on properly prepared surfaces such as: Drywall

COVERAGE

Average 12 oz can covers up to 60 sq ft

PRODUCT USAGE

Allow to Completely Dry:
Before Applying Paint
Coverage:

12 oz: Up to 60 sq. ft.
Soap & Water
Clean-Up

Where to Use

Ideal for use on properly prepared surfaces such as: Drywall

Preparation

The surface must be clean and dry before spraying ETX® SingleShot™ Wall Texture.

Application

Always keep nozzle pointed away from face. The use of personal protective equipment is required.
Shake can vigorously for 10–15 seconds. This product works best when contents are between 75°F and 90°F.
The adjustable nozzle allows for infinite adjustability.
Holding the can upright approximately 16–22 inches from the wall/ceiling, depress the nozzle to begin spraying. Test ETX® SingleShot™ Wall Texture in an inconspicuous spot to achieve the desired pattern. If the flow decreases, shake the can vigorously. Spray using a circular motion to disperse evenly. Overlap the spray onto the existing texture to help blend in. A second coat may be applied for a heavier texture.

Dry Time

Drying times will differ, depending on the surface, heaviness of texture, humidity, etc. Paint when completely dry with your choice of paint. For better results, prime area before painting.

Clean-Up & Disposal

Clear spray valve immediately after use by turning can upside down and spraying until only clear gas is released. If spray nozzle becomes clogged, remove and clean with water.
Do not stick pins or wire into spray nozzle opening.
Do not burn or place in home trash compactor.
Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.