ETX^® SingleShot^™ Plus Wall & Ceiling Texture

Avg. Rating:

ETX® SingleShot™ Plus Wall and Ceiling Texture is the perfect solution for drywall patches that require texture. Equipped with an angled nozzle for ceilings and hard-to-reach areas, the aerosol spray can system provides ultimate control over a variety of texture patterns from a fine Orange Peel to a heavy Knockdown. Discover the power of SingleShot Wall and Ceiling Texture and unlock professional-grade results with effortless cleanup for all your drywall repair projects!

FINISH

An assortment of texture patterns from a fine Orange Peel to a heavy Knockdown

BEST FOR USE IN

Ideal for use on properly prepared surfaces such as: Drywall

COVERAGE

Average 20 oz can covers up to 80 sq ft

PRODUCT USAGE

Allow to Completely Dry:
Before Applying Paint
Coverage:
20oz: Up to 80 sq.ft.
Soap & Water
Clean-Up

Where to Use

Ideal for use on properly prepared surfaces such as: Drywall

Preparation

The surface must be clean and dry before spraying ETX® SingleShot™ Plus Wall & Ceiling Texture.

Application

Always keep nozzle pointed away from face. The use of personal protective equipment is required.
Shake can vigorously for 10–15 seconds. This product works best when contents are between 75°F and 90°F.
The adjustable nozzle allows for infinite adjustability. Simply twist the nozzle clockwise for knockdown and counterclockwise for orange peel.
Holding the can upright approximately 30-34 inches from wall, depress the nozzle to begin spraying. Test ETX® SingleShot™ Plus Wall & Ceiling Texture in an inconspicuous spot to make sure you have achieved the desired pattern. If the flow decreases, shake the can vigorously. Spray using a circular motion to disperse evenly. Overlap the spray onto the existing texture to help blend in. A second coat may be applied for a heavier texture.

Dry Time

Drying times will differ, depending on the surface, heaviness of texture, humidity, etc. Paint when completely dry with your choice of paint. For better results, prime area before painting.

Clean-Up & Disposal

When finished applying texture, purge the inner tube by flipping the can upside down and pressing down on the nozzle.
Do not stick pins or wire into spray nozzle opening.
Do not burn or place in home trash compactor.
Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.