BEHR MARQUEE^® Advanced Stain-Blocking Ceiling Paint & Primer

Avg. Rating:

Behr's most advanced ceiling paint features guaranteed one-coat hide^◆ plus an exclusive BEHR DYNASTY® & MARQUEE® Interior One-Coat Color Collection. This 100% acrylic, antimicrobial-mildew resistant finish makes BEHR MARQUEE Advanced Stain-Blocking Ceiling Paint & Primer ideal for every room.

Now comes with the new SIMPLE POUR Lid. Read about how this innovative lid helps you and get our best tips for using it.

Learn about the BEHR DYNASTY® & MARQUEE® Interior One-Coat Color Collection Guarantee.

^◊A primer coat may be needed on some surfaces. See label for details.

^◆Valid only when tinted to colors from the BEHR DYNASTY® & MARQUEE® Interior One-Coat Hide Color Collection. Learn more.

Finish

A ceiling flat with a gloss level of < 3 at 60° and sheen of < 3 at 85°

Best For Use In

Properly prepared coated and uncoated Interior Ceilings. For water stains, apply MARQUEE Ceiling Paint as a primer to the stained area prior to topcoat.

Coverage

Up to 400 Sq. Ft. per Gallon

PRODUCT USAGE

1 Hr Dry Time
2 HR Recoat Time
Up to 400 Sq. Ft
Coverage per Gal.
Soap & Water
Clean-Up
Protect
from Freezing

Where to Use

Properly prepared coated and uncoated Interior Ceilings. For water stains, apply MARQUEE Ceiling Paint as a primer to the stained area prior to topcoat.

Preparation

Properly prepare and clean all surfaces.
Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry.
Remove mildew stains with a mildew stain remover.
Scuff sand glossy surfaces and repair imperfections.
Remove all dust with a damp cloth, allow to dry.
Allow new stucco, plaster and masonry to cure for 30 days before painting.
Darker colors may require additional dry time between coats.

Prime

Lock in water stains with MARQUEE Ceiling Paint as a spot primer.
For heavy stains, test for stain bleed-through by applying MARQUEE Ceiling Paint to a small section.
If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating.
If bleeding continues, a longer dry time is needed before topcoating.

Application

Apply when air and surface temperatures are between 50-90°F (10-32°C).
Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .019" spray tip, 60 mesh filter).
Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
Fully saturate roller for best coverage.
Untinted bases and colors outside of the MARQUEE Interior One-Coat Color Collection may require more than one coat to achieve complete hide and a uniform finish.
Darker colors may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
After 2 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Dry paint film is mildew resistant.
Do not use on floors.

Disposal

For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

SDS AND DATA SHEET

BEHR MARQUEE^® Advanced Stain-Blocking Ceiling Paint & Primer

Pure White No. 1458

See Full SDS, Product Data & Safety

WARRANTY

LIFETIME LIMITED WARRANTY: Behr Process LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.