BEHR PREMIUM^® Low-Lustre Sealer

Avg. Rating:

Beautify and protect the natural beauty of all your home's concrete & masonry surfaces with BEHR PREMIUM Concrete, Brick & Tile Low-Lustre Sealer. This low-gloss formula can also be used on pavers, artificial stone and stucco, and it also makes a great topcoat over paints and stains.

PRODUCT WILL APPEAR MILKY IN CONTAINER BUT DRIES TO A CLEAR FINISH

1 gal jug of Behr Premium Low-Lustre Sealer

Finish

Low-Gloss

Best For Use In

Use on previously Coated or Uncoated, Vertical or Horizontal, Interior or Exterior concrete and masonry surfaces.

Coverage

200-450 Sq. Ft per Gallon

PRODUCT USAGE

Spread Rate
200-450 Sq. Ft
1 HR Dry Time
4 HR Recoat Time
Soap & Water
Clean-Up
Protect
from Freezing

Where to Use CAUTION: Sealed surfaces may become slippery when wet. Use caution when walking on surface when moisture is present. Apply in sections so wet material does not have to be walked on during application.

Use on previously Coated or Uncoated, Vertical or Horizontal, Interior or Exterior surfaces such as: Pavers, Concrete, Mexican Tile and Unglazed Tiles, Brick, Aggregate, Natural and Artificial Stone, Masonry and Stucco.
Not recommended for use on Wood, Metal, Granite, Marble, Terrazzo, areas immediately adjacent to pools or areas subject to hydrostatic pressure. Do not use over Oil-Based products.

Preparation

New concrete must cure for a minimum of 30 days.
For new or smooth concrete, use a concrete & masonry cleaner & etcher product.
Clean previously created surfaces in sound condition with a concrete & masonry degreaser & cleaner product.
Stamped concrete requires the use of a cleaner to remove release agent prior to sealing.
Scrape and remove loose and peeling coating. To strip the surface, use a concrete & masonry paint stripper product.

Application

Note: Horizontal surfaces may be subject to excessive wear. Therefore, periodic touch-ups may be necessary.

DO NOT THIN. Stir or shake before applying.
Use product when temperature is between 50-80°F (10-27°C). Do not apply in direct sunlight. Do not apply to wet surfaces or if rain or heavy dew is expected within 24 hours.
Apply a thin coat using a nylon/polyester brush, 1/4” - 3/8” nap roller, high quality pad applicator or a high quality pump sprayer with an adjustable tip at a spread rate of 200-450 sq. ft. (19-42 m2) per gallon. Spread rate is highly dependent on surface roughness and porosity. If sprayed, backroll for uniform thickness.
Additional coats (no more than 4) may be added for a higher gloss and added protection.

Dry Time

Longer dry time required in cooler temperatures and higher humidity.
Allow to dry 24 hours for light foot traffic. 72 hours to reposition furniture/heavy foot traffic and park tires on corrugated cardboard for 14 days.
Clean with a mild, non-abrasive liquid detergent after 30 days.

Disposal

Properly dispose of all soiled rags.
For disposal of empty containers and unused paint, contact your household refuse collection service.

SDS AND DATA SHEET

BEHR PREMIUM^® Low-Lustre Sealer

Low-Lustre Sealer No. 986

See Full SDS, Product Data & Safety

WARRANTY

LIMITED WARRANTY: For one year from the date of purchase, Behr Paint Company warrants to the original consumer purchaser, (1) that the product meets Behr Paint Company manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Paint Company will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. To obtain warranty service, call 1-800-854-0133. Behr Paint Company reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.