Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS ULTRA® Stain-Blocking Ceiling Paint

PREMIUM PLUS ULTRA® Stain-Blocking Ceiling Paint

For advanced performance and stain-blocking on all of your home’s ceilings, choose BEHR PREMIUM PLUS ULTRA® Stain-Blocking Ceiling Paint. Its flat sheen hides minor surface imperfections, and can be tinted to light colors.

Finish
A flat sheen has a matte, non-reflective finish that's easy to clean, touches up well and will also hide minor surface imperfections.
Where to Use
Properly prepared coated and uncoated Interior Ceilings.
Coverage
250-400 sq. ft. per Gallon

Latest Featured Reviews

DO NOT OPEN CAN WITHOUT READING INSTRUCTIONS. PROTECT FROM FREEZING.

Browse for Colors Online

Browse, coordinate and preview colors now, with ColorSmart by BEHR®.

Start Now »

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

MSDS & Data Sheet

Where to Use

Properly prepared coated and uncoated Interior Ceilings.

Usage Summary

30 Min Dry Time
1 HR Recoat Time
250-400 Sq. Ft 
Coverage per Gallon
Soap & Water
Clean-Up
Protect
from Freezing

Preparation & Prime

  • Remove loose paint, wash off any dirt and grease with detergent, remove mildew stains with a mildew stain removing product.
  • Scuff sand glossy surfaces.
  • Countersink nailheads, repair imperfections and sand smooth.
  • Remove all dust with a damp cloth, allow to dry.
  • Allow new stucco, plaster and masonry to cure for 30 days before priming.
  • Make sure that there are no active water problems and that any previous water damage is fully dry.
  • Use BEHR PREMIUM PLUS ULTRA® STAIN-BLOCKING CEILING PAINT as a primer for repaired or uncoated surfaces.
  • Lock in stains with BEHR PREMIUM PLUS ULTRA STAIN-BLOCKING CEILING PAINT as a spot primer. For heavy stains, test for stain bleedthrough by applying BEHR PREMIUM PLUS ULTRA STAIN-BLOCKING CEILING PAINT as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before topcoating the entire ceiling. If bleeding continues, a longer dry time is needed before topcoating. Additional coats may be needed to achieve hide.
  • For drastic color changes, apply a primer coat of BEHR PREMIUM PLUS ULTRA STAIN-BLOCKING CEILING PAINT if needed.

Application

  • Use product when the surface and air temperatures are between 50-90°F (10-32°C).
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • Use a high quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019” spray tip, 60 mesh filter).
  • Popcorn style acoustic ceilings; use acoustic ceiling roller cover (1/2-3/4” nap) or airless sprayer (.015-.019” spray tip, 60 mesh filter).
  • Coverage is 250-400 sq. ft. (23-37 m2) per gallon depending on the surface texture, porosity and application method.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Multiple coats may be required to complete hide.

Dry Time

  • Dries to touch in 30 minutes at 77°F (25°C) and 50% humidity, re-coat in 1 hour.
  • Longer dry time required in cooler temperatures and in higher humidity.

Clean Up & Storage

  • Use soap and water.
  • Properly dispose of all soiled rags and protect unused product from freezing.
  • For disposal of empty containers and unused product, contact your local household refuse collection service.

To consult with a BEHR Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Refer to the BEHR Interior Paint Guide for additional tips or get perfect color coordination with COLORSMART BY BEHR™.

Other Products You May Like