Shopping Cart is Full

You cannot add any additional items to the Shopping Cart

Close Window

Ask an Expert by Email


Thank you,
Your email has been sent to our experts.



See all Products »

PREMIUM PLUS ULTRA® Exterior Flat

PREMIUM PLUS ULTRA® Exterior Flat

For a classic look on your home’s exterior walls, choose BEHR PREMIUM PLUS ULTRA Exterior Flat paint. This traditional, non-reflective matte sheen minimizes surface imperfections on wood and vinyl siding. It provides excellent touch-up to help maintain the look, and it can also be used on stucco, brick and other masonry, as well as fences.

Finish
A flat paint sheen is a non-reflective sheen that’s easy to apply and touch up. It will minimize the appearance of minor surface imperfections.
Where to Use
Wood and vinyl walls and siding; brick and other masonry; fences
Coverage
250-400 Sq. Ft. per Gallon

Latest Featured Reviews

FOR TINT BASES - DO NOT USE WITHOUT THE ADDITION OF TINTING COLORANTS

Find a Store

Enter your Zip/Postal Code to find the nearest Home Depot

Buy Online

Paint samples, gallons, and five gallons are available online.

Buy Online »

Where to Use

Properly prepared and cleaned coated or uncoated exterior surfaces. Ideal for Wood, Vinyl,Aluminum, Fiber Cement Siding,Metals, Brick, Masonry, Stucco, Steel, and Fences.

Usage Summary

2 HR Dry Time 
4 HR Recoat Time
250-400 Sq. Ft 
Coverage per Gallon
Soap & Water
Clean-Up
Protect
from Freezing

Preparation & Prime†

  • Countersink nailheads, fill and sand smooth. Remove rust, loose or peeling paint. Repair imperfections and sand smooth.
  • Wash off dirt, grease and chalk with detergent and/or powerwash. Remove mildew stains with a mildew stain removing product.
  • Clean and sand new or weathered wood. Scuff sand or degloss smooth or glossy surfaces.
  • Scuff sand or etch metals. Rinse and allow to dry.
  • Caulk windows, doors and other openings. Allow new stucco, plaster and masonry to cure for 30 days before painting.
  • Use BEHR PREMIUM PLUS ULTRA® paint as a primer for repaired or uncoated surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas.
  • Lock in stains with the first primer coat; if necessary, apply a second primer coat of BEHR PREMIUM PLUS ULTRA.
  • For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR PREMIUM PLUS ULTRA if needed.

Application

  • Apply product on dry substrates when air and surface temperatures are between 35°-90°F (2°-32°C) and will remain between 35°-90°F (2°-32°C) for at least 4 hours after applying.
  • Do not paint when rain or heavy condensation is expected.
  • Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
  • On semi-smooth surfaces, use a high quality 3/8-1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015-.021” spray tip, 60 mesh filter).
  • On rough surfaces, use a high quality 3/4-1” nap roller cover.
  • Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.
  • Certain colors may require more than one coat for complete hide.
  • On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats. Cooler temperatures or higher humidity may prolong drying time.
  • After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
  • Dry paint film is mildew resistant.
  • When applying to vinyl, color choice must be the same color or lighter than the existing color. Do not use on floors.

Disposal

  • For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.

Visit behr.com for painting tips, expert project advice and the perfect color coordination with COLORSMART BY BEHR™.

To consult with a BEHR Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

Other Products You May Like